Filter
Top Products
CONTROLS
English-18
C
H
O
K
E
T
H
R
O
T
T
L
E
B
L
A
D
E
D
R
IV
E
C
H
O
K
E
T
H
R
O
T
T
L
E
B
L
A
D
E
D
R
IV
E
C
H
O
K
E
T
H
R
O
T
T
L
E
B
L
A
D
E
D
R
IV
E
C
H
O
K
E
T
H
R
O
T
T
L
E
B
L
A
D
E
D
R
IV
E
Hour Meter
The hour meter displays the total operating time.
It will ash CHG OIL (Change Oil) at 50 hour intervals.
The ash duration is one hour before and one hour
after the interval. The CHG OIL icon will come on
and shut off automatically. The hour meter cannot be
manually reset.
8058-018-1
Hour meter
IMPORTANT INFORMATION
Do not run the starter for more than ve
seconds each time. If the engine does
not start, wait about 10 seconds before
retrying.
Ignition Switch
The ignition key is placed on the driver’s panel and is
used to start and stop the engine.
Choke Control
The choke mode is used for cold starts in order to
provide the engine with a richer fuel mixture.
Choke the engine by pulling the knob fully up.
Throttle Control
The throttle control regulates the engine speed and
thereby the rate of rotation of the blades, assuming the
blade switch is pulled out, see Engaging the Mower
Deck.
In order to increase or decrease the engine speed, the
control is moved.
Avoid idling the engine for long periods, as there is a
risk of fouling the spark plug.
USE FULL THROTTLE WHEN MOWING, for best
mower performance and battery charging.
8058-018-1
Ignition switch
8058-018-1
Choke control
8058-018-1
Throttle control