Husqvarna BZ 27 Lawn Mower User Manual


 
English-42
MAINTENANCE
Filter replacement
1. Unfasten the two plastic clamps on the
sides of the air filter cover. Remove the
air filter cover.
2. Remove the main filter (outer filter) by
pulling it out by hand. Lightly brush or
use mild air pressure to clean.
3. Only remove and replace safety element
after the paper filter has been replaced 3
or 4 times.
4. Clean inside of the filter housing. Wipe
dry only.
5. Install the inner filter with the open end
first. Ensure that it enters its recess at
the end of the housing and push it in to
the end.
6. Install the main filter with the open end
first. Ensure that it enters its recess at
the end of the housing and push it in to
the end.
7. Replace the cover over the air filter
housing. Fasten the two plastic clamps
making sure the cover is snapped into
position.
8. Turn the end cover with the rubber valve
pointing downwards and install it.
9. Push top of dust load indicator to reset it.
1. Dust Load Indicator
2. Clamp
BAM-15
1
2
Removing the air filter cover
BAM-16
Paper filter
IMPORTANT INFORMATION
The end cover must be installed with the
rubber valve pointing downwards,
otherwise the rubber valve will not
function.
BAM-17
Safety element