Filter
Top Products
English-24
CONTROLS
Relays
The relays and glow plug timer are located in
a holder to the right side of the seat.
Tracking
The tracking knob is located in front of the left
control lever. Rotating this knob allows fine
tuning adjustments so that the machine
tracks straight with the drive levers in the full
forward position. Rotate the knob colockwise
(as viewed from the operating position) to
increase the speed or counterclockwise to
devrease the speed on the left control lever.
Example: If control levers are full forward and
the unit turns to the right, turn the tracking
knob counterclockwise to decrease the speed
on the left control lever.
Accessories
For mulching, there is a Mulch Kit attachment
available. This is mounted underneath the
mower deck and comprised of baffles and
mulch blades.
ROPS (Roll Over Protection System) is also
available for the unit.
A baffle kit is available for the TRD61B - 61"
and TRD72B - 72" cutting decks.
Relays
RUN
RELAY
START
RELAY
BAM-12A
1
2
3
8011-442
Tracking knob
8011-566
Mulch kit attachment
1. Glow plug timer
2. Glow plug relay
3. Run relay
4. Start relay
5. Seat relay