Filter
Top Products
31
OPERATION
8058-237
Park brake fault light
Ignition System Faults
The SmartSwitch Ignition is programmed to warn
when any part of the safety system is not being
followed and will not allow the unit to be started until
all system faults are resolved.
The park brake fault light will blink if the park brake
has not been engaged.
8058-238
Blade switch fault light
8058-239
Motion control lever fault light
The blade switch fault light will blink if the blade
control switch has not been disengaged (down
position) or is disconnected.
The motion control fault light will blink if the motion
control levers are not in the neutral (outer) position.