Filter
Top Products
16
SAFETY
Safety System
The machine is equipped with a safety system that
prevents starting or driving under the following
conditions.
The engine can only be started when:
• The mower blades are disengaged.
• The park brake is on.
• The motion control levers are in neutral.
After the machine is started, the engine will continue
to run for five minutes if the operator leaves the
seat after setting the park brake. The blades will be
disengaged by the safety system. This allows the
operator to leave the machine momentarily to remove
obstacles from the mowing path without having to re-
enter the passcode.
8058-241
Conditions for starting
8058-243
Park brake and blade switch fault lights
8058-238
Blade switch fault light
The blade switch light will blink until the blade switch
is disengaged. See Ignition System Faults in the
Operation section. When the operator returns to the
seat, the blade switch will need to be reset (pushed
down, pulled up ) to re-engage the blades.
If the park brake is not engaged before the operator
leaves the seat, the engine and blades will shut down
and the blade switch and park brake lights will blink,
signalling a safety system fault.