Husqvarna 326C, 326L, 326LS, 326LX-Series, 326LDX-Series Brush Cutter User Manual


 
English
– 3
CONTENTS
Contents Note the following before starting:
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
Maintenance, replacement, or repair of the emission control
devices and system may be performed by any nonroad
engine repair establishment or individual.
This engine label certies that the product is certied in
accordance with American exhaust emissions requirements
EPA Ph II and CARB Tier II. The Emissions Compliance
Period referred to on the emissions Compliance label
indicates the number of operating hours for which the engine
has been shown to meet Federal and California emisson
requirements.
Category C = 50 hours, B = 125 hours, and A = 300 hours.
KEY TO SYMBOLS
Symbols ....................................................................... 2
CONTENTS
Contents ...................................................................... 3
Note the following before starting: ................................ 3
INTRODUCTION
Dear customer! ............................................................ 4
WHAT IS WHAT?
What is what? .............................................................. 5
GENERAL SAFETY PRECAUTIONS
Important ...................................................................... 6
Personal protective equipment ..................................... 6
Machine
s safety equipment ........................................ 6
Cutting equipment ........................................................ 9
ASSEMBLY
Fitting the loop handle ................................................. 10
Fitting the loop handle ................................................. 10
Assembling and dismantling the two-piece shaft ......... 10
Fitting the trimmer head ............................................... 11
Fitting a trimmer guard and Superauto II 1" trimmer
head ............................................................................. 11
Fitting other guards and cutting attachments ............... 11
Fitting the trimmer guard and trimmer head ................ 12
FUEL HANDLING
Fuel safety ................................................................... 13
Fuel .............................................................................. 13
Fueling ......................................................................... 14
STARTING AND STOPPING
Check before starting ................................................... 15
Starting and stopping ................................................... 15
WORKING TECHNIQUES
General working instructions ....................................... 17
MAINTENANCE
Carburetor .................................................................... 19
Mufer .......................................................................... 20
Cooling system ............................................................ 21
Spark plug .................................................................... 21
Two-piece shaft ........................................................... 21
Air lter ......................................................................... 21
Maintenance schedule ................................................. 23
TECHNICAL DATA
Technical data .............................................................. 24
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS ..... 26
!
WARNING! Under no circumstances may the
design of the machine be modied without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modications and/or accessories can result
in serious personal injury or the death of the
operator or others.
Your warranty may not cover damage or
liability caused by the use of non-authorized
accessories or replacement parts.
!
WARNING! A clearing saw, brushcutter or
trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.