Husqvarna 305 Lawn Mower User Manual


 
56 - English
8. MAINTENANCE
Body
Use a damp, soft sponge or cloth to clean the body.
If the body is very dirty it may be necessary to use
a soap solution or washing-up liquid.
Charging station
Clean the charging station regularly from grass,
leaves, twigs and other objects that may impede
docking.
8.5 Transport and removal
Secure the machine during transport. It is important
that Automower
®
does not move when it is being
transported, for instance, between lawns.
8.6 In the case of thunderstorms
To reduce the risk of damage to components in the
Automower
®
, we recommend that all connections to
the charging station are disconnected (power supply,
boundary wire and guide wire) if there is a risk of a
thunderstorm.
8.7 Blades
There are three blades on Automower
®
, which are
screwed into the blade disc. All three blades and
screws must be replaced at the same time to obtain a
balanced mowing system.
There are several different types of mower blades to
choose from as accessories, with different features.
Use Husqvarna AB approved blades only. Please
contact your dealer for more information.
To replace the blades:
1. Set the main switch to the 0 position.
2. Wear protective gloves.
3. Turn Automower
®
upside down.
WARNING
Always use originalblades and
screws when replacing.
Only replacing the blades and
reusing the screw can result in the
screw wearing during mowing and
shearing off. The blades can then be
thrown out and cause serious injury.