Husqvarna 254XP, 257, 262XP Chainsaw User Manual


 
English – 35
262XP
3,8/62
1,89/48
1,34/34
2.700
13.500
3,4/9.600
Ducati
ET
Champion
RCJ 7Y
.012/0,5
Walbro
HDA120
1,2/0,6
6,5-13,5
0,6/0,3
Automatic
12,7/5,8
262XP
100
109
3,3
5,4
15"/38
13"/33–20"/51
11-19"/
30-49
18,5
.325"/ 3/8
.058/1,5
7
TECHNICAL DATA
Engine
Cylinder volume, cu.in/cm
3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max.
speed, unloaded, rpm
Power, kW
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication
system
Manufacturer
Carburettor type
Fuel capacity, US pint/litre
Oil pump capacity at 8500 rpm,
ml/min
Oil capacity, US pint/litre
Type of oil pump
Weight
Without bar and chain, Lbs/kg
Noise levels
Equivalent (see note 1) noise
pressure level at operator’s
ear, measured according to
relevant international
standards, dB(A).
Equivalent (see note) noise
power level, measured
according to relevant interna-
tional standards, dB(A).
Vibration levels
(See note 2)
Front handle m/s
2
Rear handle m/s
2
Chain/bar
Standard bar length,
inches/cm
Recommended bar lengths,
inches/cm
Usable cutting length
inches/cm
Chain speed at max.
power, m/sec
Pitch, inches
Thickness of drive link, inch/
mm
Number of teeth on drive
sprocket
Note 1: Equivalent noise level is, according to ISO 7182 and
ISO 9207, calculated as the time-weighted energy total for
noise levels under various working conditions with the following
time distribution: 1/3 idle, 1/3 full load, 1/3 full speed.
Note 2: Equivalent vibration level is, according to ISO 7505,
calculated as the time-weighted energy total for vibration levels
under various working conditions with the following time
distribution: 1/3 idle, 1/3 full load, 1/3 full speed.
Bar and chain combinations
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max.
inches inches tip radius
13 .325 10T Husqvarna H25
15 .325 10T Husqvarna H25
16 .325 10T Husqvarna H25
18 .325 10T Husqvarna H25
13 .325 10T Husqvarna H21
15 .325 10T Husqvarna H21
16 .325 10T Husqvarna H21
18 .325 10T Husqvarna H21
16 3/8 11T Husqvarna H42
18 3/8 11T Husqvarna H42
20 3/8 11T Husqvarna H42
1
5
L
Type Inch Inch/mm Inch/mm Degree° Degree° Degree° Inch/mm Inch/cm: dl
H25 .325" .058"/1,5 3/16" /4,8 85° 30° 10° .025"/0,65 13"/33:56 15/38:64
H21 18/46:72
H42 3/8" .058"/1,5 7/32" /5,5 60° 25° 10° .025"/0,65 18"/46:68
20/50:72