Filter
Top Products
26 – English
Technical data
Engine
Cylinder capacity, cm
3
/cu. inch
Cylinder bore, mm/inch
Stroke length, mm/inch
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm/inch
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litres/US pint
Weight
Weight without fuel, cutting tool and guard, kg/Lbs
Noise emissions (see note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
WA
dB(A)
Noise levels (see note 2)
Equivalent noise pressure level at the user’s ear, measured
according to EN ISO 11806 and ISO 7917, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured according to EN ISO
11806 and ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
TECHNICAL DATA
240RBD
36,3/2,2
38/1,5
32/1,6
2 700
11 000-10 700
10 000
1,3kW/9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,5/0,02
Walbro WT
0,5/1,06
9,0/19,8
109
110
89/99
1,2/1,3
1,2/1,3
3,0/5,1
3,8/5,2
Approved accessories 240RBD
Centre hole in blades Ø 20 mm
Threaded blade axle M10
Grass blade
Plastic knives
Trimmer head
Edger
Hedge trimmer
Support cup
Type
Grass 255-4 (Ø 255 4-teeth)
Grass 255-8 (Ø 255 8-teeth)
Multi 255-3 (Ø 255 3-teeth)
Multi 275-4 (Ø 275 4-teeth)
Tricut Ø 300
Trimmy Hit Pro
Superauto II
Trimmy HII
Edger attachment Ø 200
Hedge trimmer attachment
Fixed
Cutting attachment guard Art No.
503 74 40-01
503 74 40-01
503 74 40-01
503 74 40-01
503 74 50-01
503 74 50-01
503 74 50-01
503 74 50-01
-
-
-
Note 1: Emission of noise to the surroundings measured as sound power (L
WA
) in accordance with the EU directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.