Filter
Top Products
English - 9
1. INTRODUCTION AND SAFETY
Transport
The original packaging should be used when
transporting Automower over long distances.
To safely move from or within the working area:
1. Press the
STOP
button to stop the mower.
If the stop protection, (see page 60) used to
prevent theft, has been activated enter the first
number of the PIN code.
You select the four digit PIN code when you start
the mower for the first time, see page 33.
2. Move the main switch to the
OFF
position if you
intend to carry the mower.
3. Carry the mower by the handle at the rear under
the mower. Carry the mower with the blade disc
away from the body.
Maintenance
• Inspect Automower each week and replace any
damaged or worn parts.
Check especially that the blades and blade disc
are not damaged. Replace all blades and screws
at the same time if necessary so that the rotating
parts are balanced, see
8. Maintenance
on
page 69.
WARNING
When the mower is turned upside
down the main switch must always
be set to the
OFF
position.
The main switch should be set to the
OFF
position during all work on the
mower’s underframe, such as
cleaning or replacing the blades.
3012-388
3012-395
3012-409