Filter
Top Products
KEY
T
O SYMBOLS
English
–
7
1154580-38
Re
v
.1
2011-12-05
Symbols on the mac
hine:
W
ARNING! Chain saws can be
dangerous! Careless or incorrect use can
result in ser
ious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
This product is in accordance with
applicab
le EC directives.
Noise emission to the environment
according to the European
Comm
unity’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Chain brake, activated (right) Chain
br
ake, not activated (left)
Refuelling.
Chain oil fill.
Ignition;
choke:
Set the choke control
in the choke position. This should
automatically set the stop switch to the
start position.
Other symbols/decals on the mac
hine refer to special
cer
tification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine bef
ore
carr
ying out any checks or
maintenance. CAUTION! The
start/stop switch automatically
returns to run position. In order to
prevent unintentional starting, the
spark plug cap must be removed
from the spark plug when
assembling, checking and/or
performing maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
wo
rn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
reverse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.