Filter
Top Products
4– English
EXPLANATION OF SYMBOLS
N
R
These symbols are on the machine and in the operator’s manual.
Study them carefully so that you know what they mean.
Read the operator’s manual
Reverse Neutral Fast Slow Engine off Battery Choke Fuel
Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic free wheel
Use hearing protection
Never use the machine if persons,
especially children, or animals,
are in the vicinity.
Never carry passengers on
the machine or equipment.
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Drive very slowly
without the cutting unit.
Keep hands and feet away
from under the hood when
the engine is running.
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
CE conformity marking
Warning! Rotating blades.
Warning! Risk that the
machine can tip over
Never drive across
a slope
Noise emission to surround-
ings in accordance with the
directive of the European
Community. The machine’s
emission is indicated in the
chapter TECHNICAL DATA
and on the decal.
Warning
ClutchBrakeParking brake
Clutch out
Clutch in