Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
1153137-49
Rev
.1
2009-12-29
Symbols on the mac
hine and/or in
the operator’s man
ual:
W
ARNING! Chain saws can be dangerous!
Careless or improper use can result in
ser
ious or f
atal injury to the operator or
others.
Please read the operator’s manual
carefully and mak
e sure y
ou understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be used
to oper
ate the chain sa
w.
Never operate a chain saw holding it with
one hand only.
Contact of the guide bar tip with any object
m
ust be a
voided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning f
ast
re
verse reaction, kicking the guide bar
up and towards the operator. May cause
serious personal injury.
Chain brake, activated (right)
Chain brak
e, not activated (left)
Decompression v
alve:
Press
the valv
e to reduce the pressure in the
cylinder and make starting easier. You
should always use the decompression
valve when starting the machine.
Ignition;
choke:
Set the choke control
in the chok
e position.
This should
automatically set the stop switch to the
start position.
Air purge
Adjustment of the oil pump
Other symbols/decals on the machine refer to special
cer
tification requirements f
or certain markets.
Switch off the engine b
y moving the
stop switch to the ST
OP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
v
es.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be w
or
n.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake should be activated
when star
ting.
For Canada onl
y:
Recommended cutting
equipment in this example:
- Bar length 20 inches
- Max tooth count for the
bar nose sproc
k
et is 11T
- Chain type Husqvarna H80
Other approved bar and chain
combinations in Operator’
s Manual.
Measured maximum kickback value with
br
ake for the bar and chain combination
on the label.
Measured maximum kickback value
without tr
igger
ing the brake, for the bar
and chain combination on the label.