Filter
Top Products
GASBOY Series 70 & 1820
5-2 0144
WHEN YOUR PUMP NEEDS SERVICE
When your pump needs service, follow these guidelines:
●
Procedures requiring disassembly of portions of the pump should be performed by
competent service personnel. GASBOY has a distributor network which services fuel
dispensing equipment in every part of the country.
●
Turn off all power to the pump to reduce the risk of electrical shock when servicing
(including changing of fuel filters or strainers). Also block islands so no vehicles can
pull up to the pump when it is being worked on.
●
Replace worn, rusted, or corroded parts immediately with new authorized service parts
supplied by GASBOY. Replacing parts with incorrect or substandard substitutes will result in
unsatisfactory pump operation. Always use new gaskets or seals when servicing or
rebuilding Gasboy equipment; do not re-use old ones. Using authorized parts will insure the
continuity of the Underwriters' Label on your pump.
Section 6 lists parts and service procedures for the Series 70 and 1820 pumps. Using part
numbers when ordering will expedite your order and reduce the possiblility of the wrong parts
being shipped.
The remainder of this section contains troubleshooting information and assembly/disassembly
procedures for various components that may need service.