Filter
Top Products
23
SET WATERING
START TIMES
PM
START TIME
SET WATERING
START TIMES
PM
START TIME
SETTING WATERING START TIME
1. Turn the dial to the SET
WATERING START TIMES
position.
2. The factory preset is set on
program A. If necessary you
can select program B, C, or D
by pressing the button.
3. Use the and buttons to
change the start time.
(Advances in 15-minute
increments.)
4. Press the button to select
the next start time, or for
the next program.
NOTE: Regardless of the order in which the start
times are entered, the ICC will always arrange the
start times in chronological order when the dial is
moved off the SET WATERING START TIMES
position.
One start time will activate all stations sequentially in that program.
This eliminates the need to enter a start time for each station.
Multiple start times in a program can be used for separate morning,
afternoon, or evening watering cycles.
ELIMINATING A PROGRAM START TIME
With the dial set to the SET
WATERING START TIMES
position, push the and
buttons until you reach 12:00 AM
(Midnight). From this position
push the button once to reach
the OFF position.
NOTE: If a program has all eight start times
turned off, then that program is off (all other
program details are retained). Because there are
no start times, there will be no watering with that
program. This is a convenient way to stop watering
on one program only without turning the dial to the
off position.