Filter
Top Products
33
4. Select Use Windows to configure my wireless network
settings.
5. Click View Wireless Networks.
6. In the Wireless Network Connection dialog box, select the
wireless network to be connected to from the wireless network list,
and then click Connect in the lower right corner of the dialog box.
7. In the displayed dialog box, enter the network access password,
and then click Connect.
After the password is verified, Connected appears on the icon of the
wireless network in the wireless network list, which indicates that
your PC is connected to the wireless network.
8. Close the Wireless Network Connection dialog box.
9. In the Wireless Network Connection Properties dialog box,
click OK.
How can I quickly restore the WS320 to the default settings?
When the WS320 is powered on, press and hold the reset button of the WS320
for over 1s by using an object with a sharp point (such as a pin), and then
release the button. Then the WS320 automatically restarts and the default
settings are restored.
Does the WPS function have any special requirement on the wireless
encryption settings of a wireless router?
The WPS function has no special requirement on the wireless encryption
settings; however, it is recommended that you use the Wi-Fi Protected Access
2–Pre-shared key (WPA2-PSK) security mode together with the Advanced
Encryption Standard (AES) encryption rather than the Wired Equivalent
Privacy (WEP) encryption method for accessing a wireless network. The