Filter
Top Products
Functions Introduction
10
Table 4-1 Requirements on PC settings
Item Requirement
Network protocol Enable the TCP/IP.
IP address and subnet mask of the PC Select Automatically obtain an IP address.
Internet Explorer Do not use the proxy server.
To log in to the Web configuration page, do as follows:
Step 1
Start the Internet Explorer on the PC.
Step 2
Enter
http://192.168.1.1
in the address bar of the Internet Explorer, and then press
Enter
.
The Login dialog box is displayed.
Step 3
Enter the name and password (
telekom
and
telekom
by default) in the
Login
dialog box,
and then click
OK
.
4.2
Accessing Mobile Storage Devices
The HG552a1 provides the home storage function. USB devices, such as USB disks, can be
connected to the USB interface on the HG552a1. You can access mobile storage devices through
the File Transfer Protocol (FTP) server.
To access a mobile storage device, do as follows:
Step 1
Connected the USB device to the USB interface on the HG552a1.
Figure 4-1 Connect to the USB interface
Step 2
Enable the FTP Server and configure the FTP Server parameters.