Filter
Top Products
PAGE 5
Programming InstructionsProgramming Instructions
Programming Example
In this example, the lawn areas , Program 1 (Group 1), are
using pop-up sprinklers & require less frequent watering.
The vegetables are being watered using drippers on a
longer run time, with the flower beds, pots, hanging
baskets and pergola areas being watered using micro
sprays. Two stations are not affected by rainfall, these are
individually set to OFF. During rain, these stations are still
watered, whilst the rest of the system is suspended.
PAGE 4
Other Functions
This controller can also manually run a selected program
once, or an individual station can be set to run once from
1 minute up to 12 hours and 59 minutes. During winter
the automatic programs can be suspended to prevent
watering while it is raining. A test facility for checking the
valves and sprinklers is also provided.
General tips for easy programming
Tips to help eliminate programming confusion.
l Complete the spare watering planner.
l When setting, one push of the button will increment
one unit.
l Holding one button down will fast scroll through units.
l During programming, only the flashing values are able
to be set, use the
or buttons.
l Pressing
next
will scroll forward through the settings
in an orderly sequence.
l Pressing
back
will scroll back to previous settings and
settings can be changed.