Filter
Top Products
GB
10
1740517
CONTENTS
LIMITED WARRANTY 9
INTERNATIONAL PICTORIALS 10
OWNER’S INFORMATION 11
SAFE OPERATION PRACTICES 11
ASSEMBLY 12
OPERATION 13
MAINTENANCE 15
TROUBLE SHOOTING CHART 18
INTERNATIONAL PICTORIALS
IMPORTANT: The following pictorials are lo-
cated on your unit or on literature supplied
with the product. Before you operate the
unit, learn and understand the purpose for
each pictorial.
NOTE: Illustrations and pictorials begin
on page 2.
Safety Warning Pictorials (Figure 29)
1 WARNING
2 IMPORTANT: Read Owner’s Manual
Before Operating This Machine.
3 WARNING: Thrown Objects. K eep
Bystanders Away. Read User Instructions
Before Operating This Machine.
4 WARNING: Do Not Use This Machine On
Slopes Greater Than 10 Degrees.
5 DANGER: Keep People, Especially
Children, Away From Unit.
6 DANGER: No Step.
7 DANGER: Keep Feet And Hands Away
From Rotating Blade.
8 Declared airborne sound power level of 100
dB(A) is in accordance with Directive
2000/14/EC.
9 DANGER: Disconnect Spark Plug Wire
Before Servicing Unit.
10 WARNING: Hot Surface.
11 WARNING: Maximun Loading When Using
Attachments.
12 WARNING: Crushed Fingers.
13 IMPORTANT: Follow Instructions In
Owner’s Manual To Level The Deck.
14 WARNING: Stay Clear Of Mower Blade As
Long As Engine Is Running.
Control And Operating Pictorials
(Figure 30)
1 Engine Start
2 Lights
3 Engine Run
4 Engine Stop
5 Engine Run
6 Brake
7 Parking Brake
8 Clutch
9 Slow
10 Fast
11 Choke
12 Oil
13 Blade Rotation Control
14 Raise
15 Fuel
Declared vibration emission values in accordance with Directive 98/37/EC.
Vibration Emission according to BS EN 1032: Seat 3,16
m/s
2
,
Right Running Board 2,07 m/s
2
, Left Running Board 1,68 m/s
2
Vibration Emission according to BS EN 1033: Steering Wheel 4,18 m/s
2
Values determined with operator in operating position when the machine was
operated stationary on a concrete surface at 2850 min-- 1.
Declared airborne noise emissions in accordance with Directive 2000/14/EC,
Annex VI.
Sound Pressure Level at operator position 86
dB.
Values determined at ear according to the specifications of EN ISO 11201.
Assembled inUSAby Swisherfor
Briggs&StrattonCorporation
2850150 6.4
270000001
133E
2007