Filter
Top Products
1.21
Storage
Engines stored in excess of 30 days need to be protected with a fuel addi-
tive or drained of fuel to prevent gum from forming in the fuel system
or on essential carburettor parts. To ensure your mower is maintained in
good working order it is important that the following procedure is adopt-
ed. Refer to the engine handbook as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry, ventilat-
ed area.
MOWER
MAINTENANCE
111-1270 (A) 5/3/07 11:47 am Page 1.21