Filter
Top Products
1.10
Do not put hands or feet near or under rotating parts.
Never pick up or carry the machine while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages.
- Before cleaning/checking or working on the machine.
- After striking a foreign object. Inspect the machine for damage
and ensure necessary repairs are made before re-starting.
- If the machine starts to vibrate abnormally (check immediately).
(An out of balance cutting device causes severe vibration).
Stop the engine:
- Whenever you leave the machine.
- Before refuelling.
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover
removed.
Never store the machine with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
SAFETY PRECAUTIONS
Operation
Maintenance & Storage
111-1270 (A) 5/3/07 11:47 am Page 1.10