Filter
Top Products
1.19
Remove grass debris from the top and underside of the deck immedi-
ately after use.
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm.(Not hot)
5. Tip the machine over on to its side ensuring that the air clean-
er is uppermost.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
1CG480V36B
Securing Nuts & Bolts
Deck Housing
Oil Service
MOWER
MAINTENANCE
111-1270 (A) 5/3/07 11:47 am Page 1.19