Filter
Top Products
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
SKU 99741 PAGE 13
squeezed. If a humming noise per-
sists while the motor is on stand-
by, briey discharge the nozzle in
a safe direction.
Point the Nozzle in a safe direction 6.
and squeeze the Trigger. Switch
the unit’s switch to the OFF posi-
tion whenever the gun is not in use.
Clean the area, following the tips con-
tained in the Operating Tips section.
When nished spraying turn the 7.
Power Switch to its “OFF” position,
and turn off the water supply.
WARNING: Do not disconnect the
high-pressure hose or water in-
let hose until all pressure is dis-
charged safely.
IMPORTANT8. ! When turning off
the unit after use, high pressure will
remain inside the unit, its High Pres-
sure Hose, and the water inlet hose.
Point the Water Gun in a safe direc-
tion and discharge all remaining pres-
sure. The high-pressure hose and
water inlet hose can be disconnected
after the pressure is released.
Store the pressure washer and all ac-9.
cessories according to the directions
under Storage on page 16.
IF ANY UNEXPECTED PROBLEMS
ARISE, PLEASE REFER TO THE
TROUBLESHOOTING SECTION
AT THE END OF THIS MANUAL.