Filter
Top Products
Page 27SKU 97005 For technical questions, please call 1-800-444-3353.
4. Coverage Exclusions
Warranty claims shall be filed in accordance with the
provisions of the HFT warranty policy explained in the box
at the top of the previous page. HFT shall not be liable for
any loss of use of the engine, for any alternative usage,
for any damage to goods, loss of time, or inconvenience.
Warranty coverage shall also be excluded for any part which
fails, malfunctions, or is damaged due to failure to follow
the maintenance and operating instructions set forth in the
Owner’s Manual including, but not limited to:
Use of parts which are not authorized by HFTa)
Improper installation, adjustment or repair of the engine b)
or of any warranted part unless performed by an
authorized warranty center
Failure to follow recommendations on fuel use contained c)
in the Owner’s Manual
Improper or inadequate maintenance of any warranted d)
parts
Repairs performed outside of the authorized warranty e)
service dealers
Alterations by changing, adding to or removing parts f)
from the engine.
5. Service and Maintenance
Component parts which are not scheduled for replacement
as required maintenance or are scheduled only for regular
inspection to the effect of “repair or replace as necessary”
are warranted for the warranty period. Any warranted part
which is scheduled for replacement as required maintenance
is warranted for the period of time up to the rst scheduled
replacement point for that part. Any replacement part,
provided it is equivalent in durability and performance,
may be used in performance of maintenance or repairs.
The owner is responsible for commissioning a qualied
technician/mechanic to perform all required maintenance,
as outlined in the Inspection, Cleaning, and Maintenance
section in this manual.
6. Warranted Parts
1) Fuel Metering System
Carburetor and its internal parts.i)
Fuel pump (if so equipped).ii)
Cold start enrichment system.iii)
2) Air Induction System
Intake pipe/manifold.i)
Air cleaner.ii)
3) Ignition System
Spark plug.i)
Magneto ignition system.ii)
4) Catalyst System (if so equipped)
Exhaust pipe stud.i)
Mufer.ii)
Catalytic converter (if so equipped).iii)
5) Miscellaneous Items Used in Above Systems
Vacuum, temperature and time sensitive valves i)
and switches.
Hoses, belts, connectors, and assemblies.ii)
Record Product’s Serial Number Here:
_______________________________
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown for
illustration purposes only, and are not
available individually as replacement parts.