Filter
Top Products
SKU 91142 For technical questions, please call 1-800-444-3353. Page 3
Use eye and ear protection. Always wear ANSI approved impact safety goggles
and heavy rubber boots. During pressure washing, debris can y back into your
face. Wear an ANSI approved dust mask or respirator when working around chemi-
cal dusts and mists.
Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
Maintain tools with care. Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool hoses periodically
and, if damaged, have them repaired by an authorized technician. The handles must be kept
clean, dry, and free from oil and grease at all times.
Turn power off. Turn off engine when not in use.
Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are
removed from the tool or machine work surface before turning engine on.
Avoid unintentional starting. Be sure that the water handle switch is in the Off position
when not in use and before turning engine on. Do not carry spray handle with your nger on
the trigger, whether engine is turn on or not.
Stay alert. Watch what you are doing, use common sense. Do not operate any tool when
you are tired.
Take caution as some woods contain preservatives such as copper chromium arse-
nate (CCA) which can be toxic. When high pressure spraying these materials extra care
should be taken to avoid inhalation and minimize skin contact.
Check for damaged parts. Before using any tool, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended
function. Check for alignment and binding of moving parts; any broken parts or mounting
xtures; and any other condition that may affect proper operation. Any part that is damaged
should be properly repaired or replaced by a qualied technician. Do not use the tool if any
switch does not turn On and Off properly.
Replacement parts and accessories. When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for use
with this tool. Approved accessories are available from Harbor Freight Tools.
Do not operate tool if under the inuence of alcohol or drugs. Read warning labels if
taking prescription medicine to determine if your judgment or reexes are impaired while tak-
ing drugs. If there is any doubt, do not operate the tool.
Maintenance. For your safety, service and maintenance should be performed regularly by a
qualied technician.
Use tools with both hands when required. This tool requires the use of both hands when
operating. This helps maintain tool stability and keeps hands away from the working area of
the tool.
People with pacemakers should consult their physician(s) before use. Electromagnetic
elds in close proximity to heart pacemaker could cause pacemaker interference or pace-
maker failure. Caution is necessary when near engine’s magneto or recoil starter.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.