Filter
Top Products
SKU 02433 PAGE 11
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
5. If using the Brush Wand (34C), insert the Brush Wand into the Brush Adapter (35C)
and twist the Wand into the Adapter until the Wand locks in place. Then insert the
Adapter into the Spray Wand Extension (8C), and twist the Adapter into the Extension
until the Adapter locks in place. Pull the Wand to make certain it is secure. The
Brush Wand is used to apply detergent at low pressure. (See Figure F.)
6. Attach the High Pressure Hose (24C) to the left/lower side of the Pressure Washer.
Attach the
female
part of the Quick Connector Set (36C) to the right/ lower side of
the Pressure Washer. Screw the
male
part of the Quick Connector Set onto a heavy
duty garden hose (not included). Then, attach the
male
part of the Quick Connector
Set to the
female
part of the Quick Connector Set. (See Figure G.)
BRUSH ADAPTER (35C)
SPRAY WAND EXTENSION (8C)
BRUSH WAND (34C)
FIGURE F
4. Insert the Spray Wand (9C) or Turbo Wand (33C) into the Spray Wand Extension
(8C), and twist the Wand into the Extension until the Wand locks in place. Pull the
Wand to make certain it is secure. (See Figure E.)
FIGURE E
SPRAY WAND (9C)
TURBO WAND (33C)
SPRAY WAND EXTENSION (8C)
REV 10/04
HIGH PRESSURE HOSE
(24C)
FEMALE
QUICK COUPLER
(36C)
MALE
QUICK COUPLER
(36C)
HEAVY DUTY
HOSE
(NOT INCLUDED)
FIGURE G
LEFT SIDE VIEW
RIGHT SIDE VIEW