Filter
Top Products
9.Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have them repaired
by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.
10. Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before
plugging in.
11.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
12.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for alignment and
blinding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper
operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not
use the tool if any switch does not turn On and Off properly.
13.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerator enclosures.
14.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any
other parts will void the warranty. Only use accessories intended for use with tool.
15.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to
determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the
tool.
16.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size
and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt
and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 10
amps capability ( up to 50 feet ),with wire size rated at 18 AWG. Longer extension cords require larger size
wire. If you are using the tool outdoors, use an extension cord rated for outdoor use.
17.Maintenance. For your safety, maintenance should be performed regularly by a qualified technician.
18. Never use the Electric Chainsaw Sharpener around flammable materials.
19.This product contains lead, which is a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm. (California Health & Safety Code 25249.2, et seq.)
Note: Performance of this tool (if powered by line voltage ) may vary depending on variations in local
line voltage. Extension cord usage may also affect tool performance.
Warning: The warnings, cautions, and instructions discussed in this instruction discussed in this
instruction manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operUnpacking.
Page 3