Global Machinery Company 1700W Lawn Mower User Manual


 
7
Always keep hands and feet away from rotating parts.
Keep clear of the discharge opening at all times.
Never pick up or carry an appliance while the motor is
running.
When the machine is not in use, store it in a dry, and
high or locked-up place, out of reach of children.
Check the grass catcher frequently for wear or
deterioration.
After use, disconnect the machine from the power
supply and check for damage. If you have the slightest
doubts, check with an authorised service centre.
Only use the machine according to the instructions
given in this manual.
Check regularly that the nuts, bolts, screws and other
fittings are tight and secure.
Keep the mower free of grass, leaves and other debris
build-up.
Do not tilt the appliance when switching on the motor,
except if the appliance has to be tilted for starting. In
this case, do not tilt it more than is absolutely necessary
and lift only the part which is away form the operator.
Always ensure that both hands are in the operating
position before returning the appliance to the ground.
Do not try to repair the machine or access internal
parts. Use authorised service centres only.
Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
machine when you are tired, sick or under the influence
of alcohol or other drugs.
Disconnect the unit from the power supply when not in
use, before servicing and when changing the blades.
Keep these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone
this unit, also loan them these instructions.
The operator or user is responsible for accidents or
hazards occurring to other people or their property.
Failure to follow operating instructions and safety precautions
in this instruction manual can result in serious injury. Read the
manual before starting or operating this unit.
Wear eye protection
Wear hearing protection
Wear respiratory protection
WARNING.
Before connecting a tool to a power source
(mains switch power point receptacle, outlet, etc.) be sure
that the voltage supply is the same as that specified on
the nameplate of the tool. A power source with a voltage
greater than that specified for the tool can result in serious
injury to the user, as well as damage to the tool.
If in doubt, do not plug in the tool. Using a power source
with a voltage less than the nameplate rating is harmful to
the motor.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing. If
you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
The mower is supplied partially disassembled.
The parts in the carton are:
Mower body (with blade fitted)
Upper handle (including switchbox, motor on/off grips,
handle joints with twist locks and motor cable saddle clip)
Lower handle (including cable tidy, motor cable saddle
clip and blade spanner)
Grass box
2 wing knobs and 2 lower handle fixing clips
CAUTION. Never carry out any assembly operations or
adjustments with the power connected to the mower.
Always ensure that the power button is in the off position
and that the power plug is disconnected from the supply.