Filter
Top Products
13
8. Press down on the blade spanner (11) to lock it in
position under the retaining latch.
9. Return the mower to the upright position and replace
the grass box (19).
10. Reconnect the power cable to the supply and run
the mower for a few minutes to check that the blade
is properly fitted and that there is no undue noise or
vibration.
11. Use only the blade as recommended by the
manufacturer.
CLEANING THE FILTER
1. To help maintain good
airflow within the grass box
and thus ensure optimum
filling, regularly check and,
if necessary, clean the filter
(27).
2. Access the filter by using a
flat blade screwdriver to prise
off the filter cover (26).
3. Take out the filter, wash it in
warm, soapy water, rinse it
and allow it to dry.
4. Clean out the filter area and
replace the filter and the filter
cover (26).
Note:
This filter is a consumable item and not a warranty item.
MAINTENANCE
WARNING.
Always ensure that the tool is switched off and
the plug is removed from the power point before making
any adjustments or maintenance procedures.
1. Regularly check that all the
fixing screws are tight. They
may vibrate loose over time.
2. In order to take up less space
when storing the mower,
loosen both wing knobs (9)
and fold the upper handle (1)
over the lower handle (17).
3. When not in use, keep the
cord wrapped around the
cable tidy.
4. Keep the tool’s air vents
accessible when the cover
(13) is raised, unclogged and
clean at all times.
5. Remove dust and dirt
regularly.
6. Clean inside the mower body and under the deck. Use
a brush or damp rag.
7. At the end of the season, give the mower an overall
cleaning and a thorough check, including the blade.
Have the blade sharpened or replaced if necessary.
8. You can clean out the grass box with a hose or
pressure cleaner provided that you first remove it from
the mower. Replace the grass box when it is dry.
9. Do not let water come into contact with the motor.
10. Never use chemicals such as petrol or solvents to
clean plastic parts.
11. Never disassemble the tool or carry out any repairs.
12. Always have the mower maintained or repaired by a
competent person at an authorised service centre.