Filter
Top Products
Part No. 82594 Genie Z-34/22 IC 31
Operator's Manual
Third Edition • First Printing
Specifications
Height, working maximum 40 ft 8 in 12.4 m
Height, platform maximum 34 ft 8 in 10.6 m
Height, stowed maximum 6 ft 7 in 2 m
Horizontal reach maximum 22 ft 4 in 6.8 m
Width 5 ft 8 in 1.7 m
Length, stowed 18 ft 6 in 5.6 m
Maximum load capacity 500 lb 227 kg
Wheelbase 6 ft 2 in 1.9 m
Turning radius (outside) 13 ft 1 in 4 m
Turning radius (inside) 5 ft 8 in 1.7 m
Ground clearance
2WD models 5.75 in 14.6 cm
4WD models 6.5 in 16.5 cm
Turntable rotation (degrees) 355°
Turntable tailswing 0
Platform leveling self-leveling
Platform rotation (degrees) 180°
Controls 12V DC proportional
Platform dimensions, 56 in x 30 in
(length x width) 1.4 m x 76 cm
Power source Kubota G/LPG 24.5 hp
OR Kubota Diesel 26 hp
Fuel capacity 11.5 gallons 43.5 liters
Gradeability (boom stowed)
2WD models 37%
4WD models 45%
AC outlet in platform standard
Hydraulic pressure, maximum 3200 psi 220.7 bar
(boom functions)
System voltage 12V
Tires size
Industrial 9-14.5
Rough terrain 10-16.5NHS
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
Weight See Serial Plate
(Machine weights vary with option configurations)
Airborne noise emissions 80 dB
Maximum sound level at normal operating workstations
(A-weighted)
Drive speeds, maximum,
Boom stowed
2WD models 4.5 mph 7.2km/h
40 ft/6.1 sec12.2 m/6.1 sec
4WD models 4.0 mph 6.4 km/h
40 ft/6.8 sec 12.2/6.8 sec
Boom
raised or extended 0.6 mph 1.0 km/h
2WD & 4WD models 40 ft/40 sec 12.2 m/40 sec
Floor Loading Information
GVW+Rated Load 11,000 lbs 4989 kg
Axle load, maximum 8300 lbs 3764 kg
Wheel load, maximum 5000 lbs 2268 kg
Localized pressure per tire 100 psi 7.03 kg/cm
2
690 kPa
Occupied floor pressure 228 psf 10.93 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.