Filter
Top Products
Part No. 82594 Genie Z-34/22 IC 23
Operator's Manual
Third Edition • First Printing
Engine Idle Select (rpm)
Select the engine idle (rpm) using the symbols on
the control panel.
· Rabbit and foot switch symbol: foot switch
activated high idle
· Turtle symbol: low idle
· Rabbit symbol: high idle
Generator (if equipped)
To operate the generator, move the generator
toggle switch to the on position. The engine will
continue to run but no drive or boom functions will
operate.
Plug a power tool into the power to platform GFCI
outlet.
To resume machine functions, move the generator
toggle switch to the off position. All functions will
operate.
Platform Overload Indicator
Light (if equipped)
Light flashing indicates the
platform is overloaded and no
functions will operate.
Remove weight from the platform
until the light goes off.
OPERATING INSTRUCTIONS
Machine Not Level Indicator
Light (if equipped)
Light on indicates the machine is not
level. The tilt alarm will be sounding
when this light is on. Move the machine
to a firm level surface.
Fall Protection
Personal fall protection equipment (PFPE) is
required when operating this machine.
All PFPE must comply with applicable
governmental regulations, and must be inspected
and used in accordance with the PFPE
manufacturer’s instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Retract and lower the boom to the stowed
position.
3 Rotate the turntable so that the boom is between
the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.