Filter
Top Products
12 Genie Z-34/22 IC Part No. 82594
Operator's Manual Third Edition • First Printing
MAINTENANCE
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Check the oil level with the
engine off.
1 Check the oil level dipstick.
Result: The oil level should be at the FULL mark
on the dipstick.
2 Add oil if necessary.
Kubota Engine DF-750
Oil viscosity requirements 10W-30
Use oils meeting API classification SF (labeled SF/CC
or SF/CD) for improved wear protection.
Units ship with 10W-40 SG/CC
Kubota Engine D-905 B-22
Oil viscosity requirements 10W-30
Engine oil should have properties of API classification
CC/SE, CD/SE, CC/SF grades.
Units ship with 10W-40 SG/CC
Check the Batteries
Proper battery condition is essential to good engine
performance and operational safety. Improper fluid
levels or damaged cables and connections can
result in engine component damage and hazardous
conditions.
Bodily injury hazard. Batteries
contain acid. Avoid spilling or
contacting battery acid. Neutralize
battery acid spills with baking
soda and water.
1 Put on protective clothing and eye wear.
2 Be sure that the battery cable connections are
tight and free of corrosion.
3 Be sure that the battery hold-down bracket is
tight.
4 Remove the battery vent caps.
5 Check the battery acid level. If needed,
replenish with distilled water to the bottom of
the battery fill tube. Do not overfill.
6 Install the vent caps.