Filter
Top Products
Part No. 43650 Genie S-80 & Genie S-85 19
Operator's ManualSecond Edition · Fifth Printing
Test Machine Functions
38 Move the lift/drive select switch to the lift
position (if equipped).
39 Press down the foot switch.
40 Activate each machine function control handle
or toggle switch.
Result: All boom/platform functions should
operate through a full cycle.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the boom is raised or
extended past the drive speed limit switches.
Test the Steering
41 Move the lift/drive select switch to the drive
position (if equipped).
42 Press down the foot switch.
43 Depress the thumb rocker switch on top of the
drive control handle in the direction identified by
the blue triangle on the control panel.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
44 Depress the thumb rocker switch in the
direction identified by the yellow triangle on the
control panel.
Result: Steer wheels should turn in the direction
that the yellow triangles point on the drive
chassis.
Test Drive and Braking
45 Move the lift/drive select switch to the drive
position (if equipped).
46 Press down the foot switch.
47 Slowly move the drive control handle in the
direction indicated by the blue arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the blue arrow points on the drive
chassis, then come to an abrupt stop.
48 Slowly move the drive control handle in the
direction indicated by the yellow arrow on the
control panel until the machine begins to move,
then return the handle to the center position.
Result: The machine should move in the
direction that the yellow arrow points on the
drive chassis, then come to an abrupt stop.
Note: The drive brakes must be able to hold the
machine on any slope it is able to climb.
FUNCTION TESTS