7GDL 30A Installation Instructions
GDL 30A Specications
Physical
4
3
/
4
in. W × 2 in. H × 6
3
/
4
in. D (121 mm W × 51 mm H × 172 mm D)
1.5 lb. (.680 kg)
Fully gasketed, high-impact plastic and aluminum alloy, waterproof to IEC 60529 IPX7
From 5°F to 158°F ( from -15°C to 70°C)
Power
10–35 Vdc
18 watts max
AGC/3AG - 2.0 A
Data Output
Proprietary Garmin data format.
Audio
300 mV rms into 47 kohm
10–20,000 Hz, ± 1 dB
<0.5%
GA 32 Antenna Specications
3
19
/
32
in. (91.6 mm) Diameter × 1
15
/
16
in. (49.5 mm) High
7.1 oz. (201 g)
Fully gasketed, high-impact plastic alloy, waterproof to IEC 529 IPX7 standards
From -40°F to 176°F (from -40°C to 80°C)
Foil-shielded, center conductor 18 AWG
999 knots, 40g
When using the chartplotter and GDL 30A on battery power only (engines off) for extended periods of time, be sure there is enough available
amperage to run the units for the time period. Running other onboard devices at the same time may lower the available amperage, causing the
chartplotter and/or GDL 30A to shut off. Check with your local marine dealer/installer if problems persist.