Filter
Top Products
6
GB
Manual watering (ON):
Bad weather function (OFF):
Change watering start time:
Change watering duration:
According to the setting of the Frequency control knob
2
,
the next watering starts after the set frequency has elapsed
(e.g. 8h = after 8, 16, 24... hours).
If a sensor inserted in the Water Timer indicates moist, the
programmed irrigation is not carried out.
Set watering start time again.
1. Turn Run-Time control knob
1
counter-clockwise to Reset.
After 2 seconds, the current time is set as the new watering
start time.
2. Turn Run-Time control knob
1
back to the desired watering
period again.
On hot or cool days, the watering duration can be changed
before the program starts, without the watering frequency and
watering start time being changed.
v Tur n Run Time control knob
1
to the altered watering duration
(e.g.: 15 minutes).
If the watering duration is changed while a program is
running, the following applies:
• If the altered watering duration is longer than the old watering
period, the new watering duration applies.
• If the altered watering duration is shorter than the old watering
period, watering is ended after one minute.
The valve can be opened or closed manually at any time.
The watering start time and watering frequency are retained.
v Tur n Run-Time control knob
1
clockwise to ON.
The valve is opened for 30 minutes, independently of the
program set.
To reactivate the set program, the previously set watering duration
must be set again.
The valve can be closed manually at any time. A program-
controlled open valve can be closed prematurely without the
watering start time and watering frequency being changed.
v Tur n Run-Time control knob
1
to OFF.
The valve is closed or remains closed independently of the
program set.
To reactivate the set program, the previously set watering duration
must be set again.
1
1
1
1