Filter
Top Products
22
www.ferrisindustries.com
Operation
ZERO TURN
DRIVING PRACTICE
The lever controls of the Zero Turn rider are
responsive, and learning to gain a smooth and
efficient control of the rider’s forward, reverse, and
turning movements will take some practice.
Spending some time going through the maneuvers
shown and becoming familiar with how the unit
accelerates, travels, and steers — before you begin
mowing —is absolutely essential to getting the most
out of the Zero Turn rider.
Locate a smooth, flat area of your lawn — one
with plenty of room to maneuver. (Clear the area
of objects, people and animals before you begin.)
Operate the unit at mid-throttle during this practice
session (ALWAYS operate at full throttle when
mowing), and turn slowly to prevent tire slippage and
damage to your lawn.
We suggest you begin with the Smooth Travel
procedure to the right, and then advance through the
forward, reverse, and turning maneuvers.
You must release the parking brake prior to moving
the control levers inward.
BASIC DRIVING
Forward Travel Practice
Gradually move both ground speed control levers
— evenly FORWARD from neutral. Slow down and
repeat.
NOTE: Straight forward travel takes practice. If
necessary, top speed can be balance-adjusted — see
the Speed Balancing Adjustment in the Adjustments
section.
Reverse Travel Practice
LOOK DOWN & BEHIND, then gradually move both
ground speed control levers evenly BACK from
neutral. Slow down and repeat.
NOTE: Practice backing up for several minutes before
attempting to do so near objects. The rider turns
sharply in reverse as well as forward, and backing up
straight takes practice.
Figure 5. Forward Travel Figure 6. Reverse Travel
Smooth Travel
The lever controls
of the Zero Turn
rider are
RESPONSIVE .
The BEST method of
handling the ground
speed control levers
is in three steps — as
shown in Figure 4.
FIRST place your
hands onto the levers
as shown.
SECOND, to go
forward gradually
push the levers
forward with your
palms.
THIRD, to speed
up move the levers
farther forward. To
slow down smoothly,
slowly move the
levers toward neutral.
Figure 4. Move Control
Levers Gradually
Forward
Travel
Reverse
Travel
Not for
Reproduction