Filter
Top Products
- 7 -
1.6 RIDING ATTACHMENTS
Use only Exmark riding attachments. The use of other than Exmark riding attachments
may create a hazardous condition resulting in injury.
1.7 SAFETY SIGNS
1.7.1 Keep all safety signs legible. Remove all grease, dirt, and debris from safety
signs and instructional labels.
1.7.2 Safety signs must be replaced if they are missing or illegible.
1.7.3 When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.7.4 New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.7.5 Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.7.6 Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO. 103-1541
LOCATION: Console
PART NO. 1-403005
LOCATION: LH & RH Front Top
Surface of Mower Deck
PART NO. 1-403143
LOCATION: RH Rear Surface of Engine Deck
PART NO. 1-603845
LOCATION: Left Rear Top Corner
of Engine Deck
PART NO. 1-413214
LOCATION: Right Side of Hydro Control Crank Arm
PART NO. 103-2239
LOCATION: Top of Mower Deck Beneath Center Shield
PART NO. 98-5954
LOCATION: Under LH, RH & Center Belt Shields