Filter
Top Products
15
DANGER
POTENTIAL HAZARD
♦ Adjusting the cutting height levers could
bring your hands into contact with a
moving blade.
WHAT CAN HAPPEN
♦ A moving blade can cause serious injury.
HOW TO AVOID THE HAZARD
♦ Stop the engine and wait for all movement
to stop before adjusting the cutting height.
♦ Do not put your fingers under the housing
when adjusting the cutting height.
a) Front Wheel Height Adjustment:
1. Pull the wheel height adjustment lever toward the wheel (Figure 6) and
move it to the desired setting.
FIGURE 6
2. Release the wheel height adjustment lever and set it securely in the notch.
3. Adjust both front wheels to the same cutting height setting.
b) Rear Wheel Height Adjustment
:
1. Pull the rear wheel height adjustment lever outward towards left wheel and
move it to the same cutting height setting as the front wheels.
2. Release the rear wheel height adjustment lever and set it securely in the
notch.
FIGURE 7