Exmark Metro 26 Lawn Mower User Manual


 
11
NOTE: Do not use methanol, gasoline containing methanol, gasohol containing
more the 10% ethanol, premium gasoline or white gas. Using these fuels can
damage the engine’s fuel system.
NOTE: Do not use gasoline that has been stored since the last mowing season or
longer.
a) Clean around the fuel tank cap.
FIGURE 2
b) Remove the cap from the tank.
c) Fill the fuel tank with unleaded gasoline to within 1/4 to 1/2 inch (6 to 13 mm)
from the top of the tank. Do not fill into the filler neck.
NOTE: Do not fill the tank more than 1/4” (6 mm) from the top of the tank
because the gasoline must have room to expand.
d) Install the fuel tank cap and wipe up any spilled gasoline.
3.2.3 Make sure you understand the controls, their locations, their functions, and their
safety requirements.
3
.3 OPERATING INSTRUCTIONS
3.3.1 Read the Engine Owner's Manual carefully for detailed operating instructions and
maintenance regarding the engine.
Before attempting to operate the unit, refer to Section 1 (Safety) and follow all
safety, operating, and preparation guidelines as stated in that section.
3.3.2 Starting the Engine
:
a) Connect the wire to the spark plug. See Figure 3.
FIGURE 3
b) Open the fuel valve. The fuel valve is located at the lower left edge of the fuel
tank. Rotate the valve counter-clockwise to turn on fuel. (Figure 4)