Filter
Top Products
Operation
Product Overview
Figure 3
1. Platform
4. Motion control levers
2. Fuel Cap 5. Engine Controls
3. Height-of-Cut
Adjustment
6. Park Brake Lever
Operation
Note: Determine the left and right sides of the
machine from the normal operating position.
Controls
Motion Control Levers
The motion control levers, located on each side of the
top console, control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns
the wheel on the same side forward or reverse
respectively. Wheel speed is proportional to the
amount the lever is moved.
Figure 4
1. LH Motion control lever 6. Neutral
2. RH Motion control lever 7. Forward
3. RH Motion control
lever in PTO disengage
position
8. Front reference/Speed
control bar
4. Reverse
9. Front of unit
5. Rear reference bar
When the motion control levers are in the neutral
position, the LCD indicator appears in the message
display on the front control console (see
Figure 5
and Figure 7).
When the motion control levers are in the neutral
position and the RH motion control lever is moved
into the PTO disengage position, the mower blades
will disengage.
15