Filter
Top Products
30
specIfIcatIons
MODEL ---------------------------------------------------- PAS-225 Value Pack
Unit Length ------------------------------------------------- 1793mm (70.6 in.)
Unit Width -------------------------------------------------- 251 mm (9.88 in.)
Unit Height ------------------------------------------------- 328 mm (12.9 in.)
Weight (dry) w/cutting attachment ---------------------- 5.75 kg (12.68 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02 in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust System -------------------------------------------- Spark arrestor mufer or spark arrestor mufer with catalyst
Carburetor--------------------------------------------------- Diaphragm model w/purge
Ignition System -------------------------------------------- CDI (capacitor discharge ignition)
Spark Plug -------------------------------------------------- NGK BPM-8Y Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ---------------------------------------------- 50 : 1 Power Blend X™ ISO-L-EGD (ISO/CD 13738) and
J.A.S.O. M345- FD, two-stroke, air-cooled engine oil.
Gasoline ----------------------------------------------------- Use 89 Octane unleaded. Do not use fuel containing methyl
alcohol, more than 10% ethyl alcohol or 15% MTBE. Do not use
alternative fuels such as E-15 or E-85.
Oil ------------------------------------------------------------ Power Blend X
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.44 lit. (14.9 US . oz.)
Starter System ---------------------------------------------- i-30 Automatic Recoil Starter
Clutch-------------------------------------------------------- Centrifugal Type
Drive Shaft (upper & lower) ----------------------------- 1/4 in. Flex Shaft
Rotating Direction ----------------------------------------- Counter clockwise viewed from top
Trimmer Attachment -------------------------------------- Nylon line head with .095 in. Cross Fire
TM
line capacity
3 m (10 ft.)
Handles* ---------------------------------------------------- Front - Loop, Rear Handle (w/rubber), when operating with stan-
dard line head
Shoulder Harness ------------------------------------------ Optional
Power Blower Attachment
- Length ----------------------------------------------------- 635 mm (25.01 in.)
- Width ------------------------------------------------------ 231 mm (9.10 in.)
- Height ------------------------------------------------------ 212 mm (8.35 in.)
- Weight ----------------------------------------------------- 1.76 kg (3.89 lbs.)
- Drive Shaft ------------------------------------------------ 6.35 mm (1/4 in.) Steel Shaft
- Maximum Air Speed (MPH) --------------------------- 100 mph
- Maximum Air Volume ----------------------------------- 317cu. ft./min.
- Sound Level at 50 ft. dB(A) scale per ANSI B175.2 69 dB(A)
Idle Speed --------------------------------------------------- 2,750 RPM
Clutch Engagement Speed ------------------------------- 3,850 RPM
Wide Open Throttle Speed (W.O.T.)
w/Nylon Line Head ---------------------------------------- 8,150 RPM
Wide Open Throttle Speed (W.O.T.)
w/Blade------------------------------------------------------ 10,750 RPM
Wide Open Throttle Speed (W.O.T.)
w/Blower Attachment ------------------------------------ 7,800 RPM