Filter
Top Products
Pro AttAchment SerieS
tm
oPerAtor'S mAnuAl
3
NOTE
This enclosed message provides tips for use, care
and maintenance of the unit.
IMPORTANT
The enclosed message provides information neces-
sary for the protection of the unit.
InternatIonal symbols
Hot
Surface
Carburetor Adjust-
ment
- Idle speed
Carburetor Adjust-
ment
- High speed
mixture
DESCRIPTION
SYMBOLSYMBOL
"WARNING, SEE OP-
ERATOR'S MANUAL
Wear eye, ear
and head protec-
tion
Emergency
Stop
Fuel and oil
mixture
Carburetor Adjust-
ment
- Low speed
mixture
Primer
Bulb
Ignition
ON/OFF
Wear hand and
foot protection
Safety/Alert
Keep bystanders and helpers
away 15 m (50 ft.).
DO NOT smoke
near fuel.
DO NOT allow
ames or sparks
near fuel.
DESCRIPTION
SYMBOL
DESCRIPTION
SYMBOL
DESCRIPTION
Choke Control
"Cold Start"
Position
(Choke Closed)
Choke Control
"Run"
Position
(Choke Open)
Do not use
blades. String
line only
CAUTION
The safety alert symbol accompanied by the word
“CAUTION” calls attention to an act or condition
which may lead to minor or moderate personal injury
if not avoided.
safety
manual
safety symbols and Important InformatIon
Throughout this manual and on the product itself, you will nd safety alerts and helpful, informational messages pre-
ceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean
to you.
DANGER
The safety alert symbol accompanied by the word
“DANGER” calls attention to an act or condition
which WILL lead to serious personal injury or death if
not avoided.
WARNING
The safety alert symbol accompanied by the word
“WARNING” calls attention to an act or condition
which CAN lead to serious personal injury or death if
not avoided.
CIRCLE AND SLASH SYMBOL
This symbol means the specic action
shown is prohibited. Ignoring these
prohibitions can result in serious or fatal
injury.
Rotating
Cutting Attach-
ment
Guaranteed sound power level
71 Category III
dB(A)
Measured at 50 ft. (15m) per ANSI B175.2