Filter
Top Products
SRM SPLIT BOOM/PAS CULTIVATOR ATTACHMENT
OPERATOR'S MANUAL
7
DESCRIPTION
Locate this safety decal on your unit. Make sure the decal is legible and that you understand and follow the instruc-
tions. If the decal cannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instruc-
tions for specific information.
P/N 89016025560
1
2
3
4
5
4
6
7
1. DRIVE SHAFT ASSEMBLY - Contains a specially designed liner and the flexible drive shaft.
2. SHIELD - Attached to deflect debris away from operator and reduce accidental contact with tines.
3. HUB - Separately attached to axle ends by clevis pin and spring pin. Tines bolt to hubs.
4. TINES - Identical on right and left side from operator's position. See page 12 for optional settings.
5. GREASE ACCESS BOLT - Apply grease to gear housing every 25 hours of use.
6. GEAR HOUSING - Houses gears and ball bearings for driving tines.
7. SERIAL NUMBER LABEL - Also serves as insertion line when drive shaft is properly engaged.