Filter
Top Products
SRM SPLIT BOOM/PAS CULTIVATOR ATTACHMENT
OPERATOR'S MANUAL
13
STORAGE
1. Clean cultivator attachment.
IMPORTANT
Do not immerse this attachment in water. Water will enter gear
housing and damage gears, bearings and seals.
2. Apply thin coating of oil to metal parts to prevent rust.
3. Lubricate lower shaft assembly with lithium grease.
4. Store cultivator attachment in a dry, dust free place, out of the
reach of children, using supplied storage hook.
Storage Hook Installation
1. Insert small end of hook into locating hole on attachment shaft.
2. Slide plastic cap onto end of attachment shaft.
SPECIFICATIONS
MODEL ......................................... SRM SPLIT BOOM AND PAS CULTIVATOR ATTACHMENT
Length ............................................. 895 mm (35.2 in.)
Width .............................................. 162 mm (6.4 in.)
Height ............................................. 211 mm (8.3 in.)
Blade Diameter .............................. 216 mm (8.5 in.)
Cultivating Width ........................... 160 mm (6.3 in.)
Weight ............................................ 1.94 kg (4.29 lb.)
Cultivator Mounting Bore .............. 25.0 mm (0.98 in.)
Coupling Square Hole ....................5.4 x 5.4 mm (0.21 x 0.21 in.)
Gear Reduction Ratio .....................46.15:1
Gear Case Capacity ........................ 38 grams (1.34 oz.)
Gear Case Lubrication ................... EP "0" or "00" Grease
Drive Shaft Lubrication .................. POWER BLENDX
TM