Filter
Top Products
6
EQUIPMENT
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.
• Inspect shield for damage and that it is securely in place. Replace if shield is damaged or missing.
• Check that the cutting tines are firmly attached and in safe operating condition.
• The cultivator gear housing is designed for ECHO recommended tines. Do not modify the gear housing for any other
purpose or replace tines with other type or size.
Parts
• Do not use cultivator attachment if any part is missing or damaged.
• Have repairs done only by an authorized ECHO Service dealer.
• Do not use any attachment, accessory, or replacement part unless it is recommended in this Operator's Manual.
WARNING
Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment
combination. Read and comply with all safety instructions listed in this manual and safety manual. ECHO, INC. will
not be responsible for the failure of cutting devices or accessories which have not been tested and approved by
ECHO for use with this unit.
WARNING
Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all
openings.
• ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop
before removing obstructions, clearing debris, or servicing unit.
• DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.
• NEVER reach into any opening while the engine is running. Moving parts may not be visible through openings.