Filter
Top Products
46
TROUBLESHOOTING
8. ENGINE STALLS WHEN BLADES ARE ENGAGED
Operator not on seat- - - - - - - - - - - - - - - - - - - - - - - - - - - sit on seat
Faulty interlock system - - - - - - - - - - - - - - - - - - - - - - consult dealer
Faulty blade spindle bearing - - - - - - - - - - - - - - - - - - consult dealer
Deck drive belt not properly routed - - - - - - - - - - - - - - - - - - - reroute
Blades blocked by foreign material - - - - - - - - - - - - clean under deck
9. DRIVE SYSTEM
Mower pulls to side- - - - - - - - - - - - check tire inflation/consult dealer
Mower creeps in neutral - - - - - - - - - - - - - - - - - - - - - consult dealer
Low on power - - - - - - - - - - - - - - - - - - - - - - - - - check belt tension
10. CUT QUALITY
Cut uneven left to right - - - - - - - - - - - - check tire inflation/level deck
Ends of grass blades are ragged - - - - - - - - - - - - - - sharpen blades
Poor dispersal of grass - - - - - - - - - - clean deck/check for loose belt
Skips in spots - - - - - - - - - - check for loose belt/slow ground speed