Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
16
SPECIFICATIONS
Chassis:
Body:
Mower Deck:
Blade Drive:
Transmission:
Engine:
Starting
System:
Tires:
Capacities:
Dimensions:
1½" x 2" rectangle tubular side frame
Body parts are made of steel
42" (91cm) 13 gauge stamped 2 blade deck
Electric clutch
Each rear wheel is independently driven by a
Hydro Gear EZT hydrostatic drive with cooling
fan.
16.5 HP Briggs & Stratton Intek, 4-cycle, single
cylinder, overhead valve, air-cooled, gasoline,
vertical shaft, cast iron cylinder, full pressure lube
with spin-on filter
Electric-key switch operation with safety interlocks
on park brake, steering levers and blade drive.
Front 11 x 4.00-5 smooth tread 16-21 PSI
(110-145 kPa)
Rear 18 x 8.50-8 4-ply turf tread 8-14 PSI
(55-97 kPa)
Fuel 4.5 gallon (17 liters)
Engine Oil 1.3 quarts (1.3 liters)
Width 43" (109 cm) maximum track width
Height 43" (109 cm) to top edge of seat
Length 69" (175 cm) hitch tab to front
Weight 537 lbs. (244 kg)
SpeedZTR™ 42 Model 968999546