Dixon Ztr 44, Ztr 36, Ztr 42, Ztr 44 Lawn Mower User Manual


 
28
OPERATION INSTRUCTIONS
MOWING WITH A MULCHING ATTACHMENT
Mulching or recycling the grass clippings requires a totally
different mowing approach than would be normal when side
discharging or bagging the grass. There may be instances or
conditions where it is not possible to hide all the recycled or
mulched clippings.
In order to achieve the best results, please read and follow
the mulching tips listed below:
1. Read and follow the installation instructions that are
included with your mulcher.
2. Set the engine speed control to the wide open or full
setting.
3. Place the mower deck cut height selector in either the top
or second notch. Never cut more than
¾" (19 mm) to 1" (25mm) off the grass at any one time.
Attempting to cut more grass will result in the deck
plugging and cause the engine to stall.
4. It may be necessary to cut the lawn twice to achieve
acceptable mulching performance especially on first
cuttings or if the lawn is heavily fertilized.
5. Do not attempt to cut grass when it is wet. Mulching
performance will be very poor in wet grass conditions.
6. Maintain sharp blades throughout the cutting season. This
is very important. Optimal mulching performance cannot
be obtained with a dull or nicked blade.