Filter
Top Products
CARE AND MAINTENANCE
44
MOWER DECK LEVELING
PROCEDURE (continued)
4. Turn both outer blades to align with the deck in front-to-
rear manner. Reposition rear mounting bolts up or down
until rear of mower deck is positioned level to
1
/8" higher in
the rear than the side-to-side measurement.
5. Confirm measurements once again. Blade tips should be
level in a side-to-side manner. In the rear, blade tips
should be level to
1
/8" higher than side-to-side
measurement. In the front, blade tips should be level to
1
/8" lower than side-to-side measurement.
NOTE: This will place the mower deck in a base measurement
position. Additional adjustment may be required to
achieve desired cut for the type of grass or conditions
being mowed.
—Fig. 14—
Mounting Bolt
Chain
Slotted Deck
Hanger Plates
Front Lift Arm
Rear Lift Arm
Chain
Mounting Bolt