CONTROLS
22
BLADE DRIVE
• Located on the control panel, on operator’s
right.
• To engage the mower blade, pull up on the
switch.
• To disengage mower blade, push down.
CIRCUIT BREAKER
• Located on the control panel to the operator’s
right.
• Protection of the electrical system is by (1) 15
amp circuit breaker.
• If circuit breaker trips, push button to reset.
• If this condition repeats, consult dealer for
inspection and repair.
CHOKE AND THROTTLE
CONTROL LEVER
• Located on control panel to
operator’s right.
• Throttle control for engine
speed.
• Choke for engine starting.
• Throttle control should be set
to MAXIMUM or wide open
setting to insure adequate
cooling of the engine and to
maintain mower deck blade
speed while mowing.
—Fig. 6—
—Fig. 7—
Choke Position
Maximum
Throttle
Setting